![]() This may not be necessary if you prefer the matte finish of the paint you used, or the paint already has a glossed finish. Gloss: If you want to add a glossy finish afterwards, make sure the coats of paint have completely dried.The rod should not be in direct contact with the sun, but still in a dry location. ![]() Keep your fingers and any foreign objects away from the rod while it dries. Drying: You will want to give your rod ample time to dry.After about 20 minutes, you can add another layer of paint. Start with a light coat as a base so that there is no dripping and your paint will have a layer to stick onto. You will want to place the rod vertically so you can easily make your way around the entire rod while painting. New Coating: One of the easiest and best ways to get an overall even and successful repaint is to use spray paint.We will discuss the best paint options in the next section. This can be 1-2 coats underneath your paint or one that is mixed in to a variety of paints. Primer: You can start with a base coat, called primer, to make the paint stay on more evenly and with greater strength.Try to strip this down to a blank rod as much as you can. You can use any similar paint strippers that you would to a car, and even better if it is a more environmentally friendly one. You can either take a stripping or a sanding approach to dull the paint. These principles are similar to the process you would take for repainting an automobile. Stripping the old paint: You will want to sand down the old paint or take it off to the best of your ability to make sure the new paint has the greatest success of holding.This will give you better access to working with all areas of the rod. Take guides off the rod: Make sure you take off all guides and anything that will interfere with the painting of the rod.You cannot simply paint over the old paint because it will not be able to hold onto the surface like the original coat did. This requires a few extra steps because you want the paint to successfully cover what is underneath while still holding on for it to last. Let’s first look at the steps you need to take if you are painting a rod that has previously been painted. A color that matches your environment or the color of the water may also be helpful in tricking certain types of fish so they cannot see the rod from above the water. If you work at nighttime, maybe you’ll want some sort of light or neon colored paint that will be easier to see. The type of environment you are in may also impact the color you want your fishing rod to be. We recommend painting the rod a color you will want for the long-haul. You may be painting from scratch on a blank rod or touching up paint on a rod that has faded or isn’t the color you want. The goal of painting is to come out with a clean design that will be long lasting and not wear off. ![]() We will first address the steps you need to take to paint a fishing rod correctly. Whether you are repainting a rod that you don’t love the color of or are building a rod from a rod blank, you can leave the rod with a great finish in your desired color for all different preferences and fishing environments. ![]() This article will cover not only how you should paint a fishing rod but the types of paint you should be using to do it as well.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |